Edit Fiberhome OLT by Serial Number (SN)

Important

Please take note that the PON port of the OLT must have the NoAuth modes disabled. If you have any doubts about this, you can refer to the following manual; Configure PON Port OLT Fiberhome

What does editing ONU by SN refer to?

In AdminOLT we can edit information of an Authorized ONU in the OLT, let's assume that one of the ONUs that we have authorized in the system is damaged. We will take this situation as an example to explain the purpose of this function. So in that case in AdminOLT when editing ONU by SN we can take information from an Unauthorized ONU and use it, without losing the initial configuration we had.

Note

The ONU that we edit will be unauthorized after the process.

What information does the SN change edit?

This function can automatically change data such as the ONU Model, port, and Card.

Steps to edit information of Authorized ONU by SN

Information

Please take note that it is necessary to have Unauthorized ONUs in the same OLT as the Authorized ONU to use this function. In this example, we will use the SN of the Fiberhome ONUs.

1 Go to List of Authorized ONU's and select the ONU to edit

2 Activate the option Unauthorized SN in the form and select an available SN

Note

In case the Available SN option does not show results, despite having ONUs of the same brand as the OLT in the list of Unauthorized ONUs, press the button in the blue box, it will take you to the list of Unauthorized ONUs.

3 Confirm the data to edit

Note

Remember that the information can be modified by selecting an SN, in this example the ONU's port was modified, keep in mind that data is changed automatically. In case the modified data is not useful, you can modify it manually.

4 Confirm if the change was successful

April 12, 2024, 3:32 p.m. - Visitas: 3468