Initial OLT HSGQ Configuration - adminolt.com

Initial OLT HSGQ Configuration

 Note

The following steps are for a new OLT HSGQ or one that has been reset to factory settings.

To have a clearer understanding of how the OLT connection is structured when performing the configuration, you can refer to the following diagram on how to make the physical connection.

Steps to Configure New OLT

 Access Data

User: root
Password: admin

1 We must check that we have internet access

2 We must have our Vlan, Administration LAN, and Customer Segment LAN added. For more information, you can read the manual Configuration in RouterBoard MikroTik for OLT HSGQ

3 We must test the connection with the OLT with the default assigned IP

4 Connect our computer to the router network and ping from our terminal

5 We access the OLT's graphical interface

6 We configure the new IP for the OLT

 New IP

In this step, we will change the Default IP of the OLT to one of our Administration LAN IPs, which for this example should be in the range 192.168.20.1/24, for this case we will use the IP 192.168.20.110.

We must log in again but with the new IP

 Next Step

Now you can add it to AdminOLT, you can follow the steps in the manual Add OLT HSGQ.

     5  Add the gateway to the OLT 

We log in through the web interface and in the following section, we add the gateway IP of the private IP of the OLT.

 

April 12, 2024, 3:32 p.m. - Visitas: 12591